Technical
Joints in steel construction: Simple Connections (Reprinted Edition)
The Green book has become widely accepted as an industry standard for a range of simple connection design. Comprehensive step-by-step design procedures, worked …
New and Revised Codes & Standards: September 2009
BRITISH STANDARDS NA to BS EN 1991:- UK National Annex to Eurocode 1. Actions on structures NA to BS EN 1991-3:2006 Actions induced by cranes and machinery No …
AD 338: Guidance on the use of stainless steel
The Advisory Desk is often asked questions related to the use of stainless steel in construction. Questions typically concern design, fabrication, erection, …
They’ve changed the density of concrete — or have they?
The bulk density of reinforced concrete has been increased. SCI’s Alastair Hughes explains how this affects the steel construction industry. Introduction The …
AD 337: Wind pressures for buildings with dominant openings
This AD offers clarification on the determination of wind loads on buildings with dominant openings in the event of a severe storm. Dominant openings (defined …
New and Revised Codes & Standards: May 2009
BRITISH STANDARDS NA to BS EN 1998:- UK National Annex to Eurocode 8. Design of structures for earthquake resistance. NA to BS EN 1998-2:2005 Bridges No …
Design of Floors for Vibration: A New Approach (Revised Edition)
This new design guide will enable designers to determine the vibration response of sensitive floors with improved accuracy This publication presents guidance …
Durability of light steel framing in residential buildings. Second Edition
Confident prediction of design life is based on data recorded for more than 10 years The Second Edition of this publication updates and extends the durability …
Part L consultation
The public consultation on changes to Part L of the Building Regulations closes this month. It is proposed that the 2010 revision leads to a 25% reduction, …
This way to CE Marking
The BCSA outlines the measures which must be undertaken to fulfill the requirements of BS EN 1090-1, that allows companies to CE Mark its structural steelwork. …
