Codes & Standards from BSI Updates November and December 2009

BRITISH STANDARDS

NA to BS EN 1991- 4:2006
UK National Annex to Eurocode 1. Actions on structures. Silos and tanks
No current standard is superseded

BS EN PUBLICATIONS

BS EN 1337
Structural bearings
BS EN 1337-8:2007
Guide bearings and restraint bearings
 Supersedes BS 5400-9.1:1983 and BS 5400-9.2:1983

BS EN ISO 2560:2009
Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
Supersedes BS EN ISO 2560:2005

CORRIGENDA TO BRITISH STANDARDS

BS 2573-2:1980
Rules for the design of cranes. Specification for classification, stress calculations and design of mechanisms
CORRIGENDUM 1
Also incorporates Amendments 1 & 2

BS EN 1994-1-1:2004
Eurocode 4. Design of composite steel and concrete structures. General rules and rules for buildings
CORRIGENDUM 1

BRITISH STANDARDS WITHDRAWN

BS 5400:-
Steel, concrete and composite bridges
 BS 5400-9:-
Bridge bearings
BS 5400-9.1:1983
Code of practice for design of bridge bearings
Superseded by BS EN 1337-2:2004,        
    BS EN 1337-3:2005,
    BS EN 1337-4:2004,
    BS EN 1337-5:2005,
    BS EN 1337-6:2004,
    BS EN 1337-7:2004 and
    BS EN 1337-8:2007
BS 5400-9.2:1983
Specification for materials, manufacture and installation of bridge bearings
Superseded by BS EN 1337-2:2004,        
    BS EN 1337-3:2005,
    BS EN 1337-5:2005,                
    BS EN 1337-7:2004 and
    BS EN 1337-8:2007

BS EN 14295:2003
Welding consumables. Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification
Superseded by BS EN ISO 26304:2009

BRITISH STANDARDS UNDER REVIEW

BS EN 10306:2002
Iron and steel. Ultrasonic testing of H Beams with parallel flanges and IPE beams

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

09/30206732 DC
BS EN 1991-1-4 AMD1 Eurocode 1. Actions on structures. Part 1-4. General actions. Wind actions
No current standard is superseded

CEN EUROPEAN STANDARDS

EN 10349:2009
Steel castings. Austenitic manganese steel castings

ISO PUBLICATIONS

ISO 3506-1:2009
(Edition 2)
Mechanical properties of corrosion-resistant stainless steel fasteners. Bolts, screws and studs
Will be implemented as an identical British Standard

ISO 3506-2:2009
(Edition 2)
Mechanical properties of corrosion-resistant stainless steel fasteners. Nuts
Will be implemented as an identical British Standard

ISO 3506-3:2009
(Edition 2)
Mechanical properties of corrosion-resistant stainless steel fasteners. Set screws and similar fasteners not under tensile stress
Will be implemented as an identical British Standard

ISO 3506-4:2009
(Edition 2)
Mechanical properties of corrosion-resistant stainless steel fasteners. Tapping screws
Will be implemented as an identical British Standard