newsteelconstruction.com

NSC Archives

Technical

New and revised codes & standards from BSI Updates November & December 2013, and January 2014

BS EN PUBLICATIONS

BS EN ISO 9017:2013
Destructive tests on welds in metallic materials. Fracture test
Supersedes BS EN 1320:1997

BS EN ISO 9606-1:2013
Qualification testing of welders. Fusion welding. Steels
Supersedes BS EN 287-1:2011

BS EN ISO 9692-1:2013
Welding and allied processes. Types of joint preparation. Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
Supersedes BS EN ISO 9692-1:2003

BS EN 10149-1:2013
Hot rolled flat products made of high yield strength steels for cold forming. General technical delivery conditions
Supersedes BS EN 10149-1:1996

BS EN 10149-2:2013
Hot rolled flat products made of high yield strength steels for cold forming. Technical delivery conditions for thermomechanically rolled steels
Supersedes BS EN 10149-2:1996

BS EN 10149-3:2013
Hot rolled flat products made of high yield strength steels for cold forming. Technical delivery conditions for normalized or normalized rolled steels
Supersedes BS EN 10149-3:1996

BS EN 10269:2013
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Supersedes BS EN 10269:1999+A1:2006

BS EN ISO 10675-1:2013
Non-destructive testing of welds. Acceptance levels for radiographic testing. Steel, nickel, titanium and their alloys
Supersedes BS EN 12517-1:2006

BS EN ISO 15626:2013
Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels
Supersedes BS EN 15617:2009

BS EN ISO 17639:2013
Destructive tests on welds in metallic materials. Macroscopic and microscopic examination of welds
Supersedes BS EN 1321:1997

UPDATED BRITISH STANDARDS

BS EN 10268:2006+A1:2013
Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions
AMENDMENT 1

BRITISH STANDARDS WITHDRAWN

BS 2569-2:1965
Specification for sprayed metal coatings. Protection of iron and steel against corrosion and oxidation at elevated temperatures
Superseded by BS EN ISO 17834:2003

BS EN 287-1:2011
Qualification test of welders. Fusion welding. Steels
Superseded by BS EN ISO 9606-1:2013

BS EN 1320:1997
Destructive tests on welds in metallic materials. Fracture tests
Superseded by BS EN ISO 9017:2013

BS EN 1321:1997
Destructive test on welds in metallic materials. Macroscopic and microscopic examination of welds
Superseded by BS EN ISO 17639:2013

BS EN 12517-1:2006
Non-destructive testing of welds. Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography. Acceptance levels
Superseded by BS EN ISO 10675-1:2013

BS EN 15617:2009
Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels
Superseded by BS EN ISO 15625:2013

BRITISH STANDARDS UNDER REVIEW

BS EN ISO 2560:2009
Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification

BS EN ISO 14343:2009
Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification

BS ISO 14347:2008
Fatigue. Design procedure for welded hollow-section joints. Recommendations

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – ADOPTIONS

13/30252100 DC
BS ISO 4990 Steel castings. General technical delivery requirements

13/30252109 DC
BS ISO 9477 High strength cast steels for general engineering and structural purposes

13/30252115 DC
BS ISO 11972 Corrosion-resistant cast steels for general applications

13/30266359 DC
BS EN ISO 15614-1 Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys

13/30266377 DC
BS EN ISO 15614-7 Specification and qualification of welding procedures for metallic materials. Welding procedure test. Overlay welding

13/30286664 DC
BS EN 10139 Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions

13/30287675 DC
BS EN ISO 636 Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steel. Classification

13/30287693 DC
BS EN ISO 17632 Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification

DRAFT FOR PUBLIC COMMENT

13/30286955 DC
BS EN 1991-1-3 A1  Eurocode 1. Actions on structures. General actions. Snow loads
Comments for the above document are required by 3 February 2014

CEN EUROPEAN STANDARDS

EN 10268:2006+A1:2013
Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions

Print Friendly, PDF & Email

Share this post

Related Posts

THIS MONTH'S MAGAZINE

Click on the cover to view this month's issue as a digimag.

Archives