newsteelconstruction.com

NSC Archives

Technical

New and revised codes & standards: from BSI Updates March 2017

BRITISH STANDARDS

BS 8548:2017
Guidance for arc welding of reinforcing steel
No current standard is superseded

BS EN PUBLICATIONS

BS EN ISO 8502-2:2017
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces
Supersedes BS EN ISO 8502-2:2005

BS EN ISO 8502-3:2017
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Supersedes BS EN ISO 8502-3:2000

BS EN 10056-1:2017
Structural steel equal and unequal leg angles. Dimensions
Supersedes BS EN 10056-1:1999

BS EN 10152:2017
Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
Supersedes BS EN 10152:2009

BS EN 10365:2017
Hot rolled steel channels, I and H sections. Dimensions and masses
Supersedes BS 4-1:2005

CORRIGENDA TO BRITISH STANDARDS

BS EN 10365:2017
Hot rolled steel channels, I and H sections. Dimensions and masses
CORRIGENDUM 1

BRITISH STANDARDS PROPOSED FOR WITHDRAWAL

BS 6779-1:1998
Highway parapets for bridges and other structures. Specification for vehicle containment parapets of metal construction
This standard is proposed for withdrawal. This series has been retained for some years as current, partially superseded as the European Standards series EN 1317 were implemented as British Standards. Whilst some clauses of BS 6779 may not be in conflict with the European Standard, the series is being withdrawn as it does have conflicting clauses and this could cause confusion to users. Although withdrawn the series will continue to be available

BS 6779-3:1994
Highway parapets for bridges and other structures. Specification for vehicle containment parapets of combined metal and concrete construction
This standard is proposed for withdrawal. This series has been retained for some years as current, partially superseded as the European Standards series EN 1317 were implemented as British Standards. Whilst some clauses of BS 6779 may not be in conflict with the European Standard, the series is being withdrawn as it does have conflicting clauses and this could cause confusion to users. Although withdrawn the series will continue to be available

BRITISH STANDARDS WITHDRAWN

BS 4-1:2005
Structural steel sections. Specification for hot-rolled sections
Superseded by BS EN 10365:2017

BRITISH STANDARDS UNDER REVIEW

BS EN ISO 4759-1:2001
Tolerances for fasteners. Bolts, screws, studs and nuts. Product grades A, B and C

BS EN ISO 7093-2:2000
Plain washers. Large series. Product grade C

BS EN ISO 18286:2010
Hot-rolled stainless steel plates. Tolerances on dimensions and shape

BS ISO 888:2012
Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths

NEW WORK STARTED

EN 1011-3
Welding. Recommendations for welding of metallic materials. Arc welding of stainless steels
Will supersede BS EN 1011-3:2000

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – ADOPTIONS

17/30335249 DC
BS EN ISO 898-3 Mechanical properties of fasteners made of carbon steel and alloy steel. Part 3. Flat washers with specified property classes
Comments for the above document were required by 19 March, 2017

17/30347067 DC
BS EN 10340-1 Steel castings for structural uses. Part 1. General
Comments for the above document were required by 4 April, 2017

Share this post

Related Posts

THIS MONTH'S MAGAZINE

Click on the cover to view this month's issue as a digimag.

Archives