Technical
Codes & standards: From BSI Updates February and March 2013
BS EN PUBLICATIONS
BS EN ISO 898-1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
Supersedes BS EN ISO 898-1:2009
BS EN ISO 4035:2012
Hexagon thin nuts chamfered (style 0). Product grades A and B
Supersedes BS EN ISO 4035:2001
BS EN ISO 4036:2012
Hexagon thin nuts unchamfered (style 0). Product grade B
Supersedes BS EN ISO 4036:2001
BS EN ISO 7539-1:2012
Corrosion of metals and alloys. Stress corrosion testing. General guidance on testing procedures
Supersedes BS EN ISO 7539-1:1995
BS EN ISO 8673:2012
Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B
Supersedes BS EN ISO 8673:2001
BS EN ISO 8674:2012
Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B
Supersedes BS EN ISO 8674:2001
BS EN ISO 8675:2012
Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B
Supersedes BS EN ISO 8675:2001
BS EN ISO 17636-1:2013
Non-destructive testing of welds. Radiographic testing. X- and gamma-ray techniques with film
together with BS EN ISO 17636-2:2013, it supersedes BS EN 1435:1997, which is withdrawn
BS EN ISO 17636-2:2013
Non-destructive testing of welds. Radiographic testing. X- and gamma-ray techniques with digital detectors
together with BS EN ISO 17636-1:2013, it supersedes BS EN 1435:1997, which is withdrawn
BRITISH STANDARDS
BS 7419:2012
Specification for holding down bolts
Supersedes BS 7491:1997
CORRIGENDA TO BRITISH STANDARDS
BS EN ISO 17636-1:2013
Non-destructive testing of welds. Radiographic testing. X- and gamma-ray techniques with film.
CORRIGENDUM 1
BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 3692:2001
ISO metric precision hexagon bolts, screws and nuts. Specification
BS 4190:2001
ISO metric black hexagon bolts, screws and nuts. Specification
BRITISH STANDARDS WITHDRAWN
BS EN 1435:1997
Non-destructive examination of welds. Radiographic examination of welded joints
Superseded by BS EN ISO 17636-1:2013 and BS EN ISO 17636-2:2013
NEW WORK STARTED
EN 14399-2
High-strength structural bolting assemblies for preloading. Suitability test for preloading
Will supersede BS EN 14399-2:2005
EN 14399-3
High-strength structural bolting assemblies for preloading. System HR. Hexagon bolt and nut assemblies
Will supersede BS EN 14399-3:2005
EN 14399-4
High-strength structural bolting assemblies for preloading. System HV. Hexagon bolt and nut assemblies
Will supersede BS EN 14399-4:2005
EN 14399-5
High-strength structural bolting assemblies for preloading. Plain washers
Will supersede BS EN 14399-5:2005
EN 14399-6
High-strength structural bolting assemblies for preloading. Plain chamfered washers
Will supersede BS EN 14399-6:2005
DRAFTS FOR PUBLIC COMMENT
13/30266419 DC
BS EN ISO 23278 Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels
Comments for the above document are required by 24 May, 2013
13/30272523 DC
BS EN ISO 23277 Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels
Comments for the above document are required by 24 May, 2013
ISO PUBLICATIONS
ISO 7452:2013
(Edition 3)
Hot-rolled steel plates. Tolerances on dimensions and shape
Will not be implemented as a British Standard
CEN EUROPEAN STANDARDS
EN 1991-3:-
Eurocode 1. Actions on structures. Actions induced by cranes and machinery.
CORRIGENDUM 1: December 2012 to EN 1991-3:2006