New and revised codes and standards: From BSI Updates January 2024

BS EN PUBLICATIONS

BS EN 1991-2:2023
Eurocode 1. Actions on structures. Traffic loads on bridges and other civil engineering works
supersedes BS EN 1991-2:2003 which remains current

BS EN 1992-1-1:2023
Eurocode 2. Design of concrete structures. General rules and rules for buildings, bridges and civil engineering structures
supersedes BS EN 1992-1-1:2004+A1:2014, BS EN 1992-2:2005 and BS EN 1992-3:2006

BS EN 1992-1-2:2023
Eurocode 2. Design of concrete structures. Structural fire design
supersedes BS EN 1992-1-2:2004+A1:2019 which remains current

BS EN ISO 15614-13:2023
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Upset (resistance butt) and flash welding
supersedes BS EN ISO 15614-13:2021

BS EN 16687:2023
Construction products: Assessment of release of dangerous substances. Terminology
supersedes BS EN 16687:2015

BS EN ISO 52016-3:2023
Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads. Calculation procedures regarding adaptive building envelope elements
no current standard is superseded

BS IMPLEMENTATIONS

BS ISO 7539-12:2023
Corrosion of metals and alloys. Stress corrosion testing. Requirements for atmospheric stress corrosion cracking testing
no current standard is superseded

PUBLISHED DOCUMENTS

PD CEN/TS 1317-7:2023
Road restraint systems. Performance characterisation and test methods for terminals of safety barriers
supersedes DD ENV 1317-4:2002

PD CEN/TS 1317-9:2023
Road restraint systems. Impact tests and test methods for removable barrier sections
supersedes DD ENV 1317-4:2002

PD CEN/TS 17991:2023
Statistical verification of partial factors for buildings according to Eurocode EN 1993-1-1 Annex E
no current standard is superseded

CORRIGENDA TO BRITISH STANDARDS

BS EN ISO 3506-5:2023
Fasteners. Mechanical properties of corrosion resistant stainless steel fasteners. Special fasteners (also including fasteners from nickel alloys) for high temperature applications
Corrigendum, November 2023

UPDATED BRITISH STANDARDS

BS EN 1993-1-6:2007+A1:2017
Eurocode 3. Design of steel structures. Strength and Stability of Shell Structures
Corrigendum, December 2023; Corrigendum, February 2010

BRITISH STANDARDS REVIEWED AND CONFIRMED

BS 4449:2005+A3:2016
Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification

BS 7000-4:2013
Design management systems. Guide to managing design in construction

BS 7121-2-4:2013
Code of practice for the safe use of cranes. Inspection, maintenance and thorough examination. Loader cranes

PD 6680:2002
Guidance on the new European Standards for thermal insulation materials

PD 6687-2:2008
Recommendations for the design of structures to BS EN 1992-2:2005

NA+A2:18 to BS EN 1991-1-3:2003+A1:2015
UK National Annex to Eurocode 1: Actions on structures. General actions. Snow loads

NA+A2:2022 to BS EN 1997-1:2004+A1:2013
UK National Annex to Eurocode 7. Geotechnical design. General rules

BRITISH STANDARDS WITHDRAWN

BS EN ISO 15614-13:2021
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Upset (resistance butt) and flash welding
Superseded by BS EN ISO 15614-13:2023

NEW WORK STARTED

EN ISO 898-1
Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
will supersede BS EN ISO 898-1:2013

EN IEC 60974-10:2020/A1
Arc welding equipment. Electromagnetic compatibility (EMC) requirements
will supersede BS EN IEC 60974-10:2021

EN ISO 19443:2018/A1
Quality management systems. Specific requirements for the application of ISO 9001. 2015 by organisations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)
will supersede BS EN ISO 19443:2022

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – ADOPTIONS

23/30439301 DC
BS EN ISO 19650-6 Organisation and digitisation of information about buildings and civil engineering works, including building information modelling (BIM) Information management using building information modelling. Health and safety information
Comments for the above document were required by 21 January, 2024

23/30446474 DC
BS EN ISO 3506-3 Mechanical properties of corrosion-resistant stainless steel fasteners. Set screws and similar fasteners not under tensile stress
Comments for the above document were required by 21 January, 2024

23/30446478 DC
BS EN ISO 3506-4 Mechanical properties of corrosion-resistant stainless steel fasteners. Tapping screws
Comments for the above document were required by 21 January, 2024

23/30447782 DC
BS ISO 4931-1 Buildings and civil engineering works Principles, framework and guidance for resilience design. Adaptation to climate change
Comments for the above document were required by 13 January, 2024

23/30473034 DC
BS EN ISO 17635 Non-destructive testing of welds General rules for metallic materials
Comments for the above document were required by 22 January, 2024

DOCUMENTS NOT ISSUED AS DPCs

EN ISO 19443:2018/A1
Quality management systems. Specific requirements for the application of ISO 9001:2015 by organisations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS). Quality manage

CEN EUROPEAN STANDARDS

EN 1991-2:2023
Eurocode 1. Actions on structures. Traffic loads on bridges and other civil engineering works

EN 1992-1-1:2023
Eurocode 2. Design of concrete structures. General rules and rules for buildings, bridges and civil engineering structures

EN 1992-1-2:2023
Eurocode 2. Design of concrete structures. General rules. Structural fire design

EN 1996-3:2023
Eurocode 6. Design of masonry structures. Simplified calculation methods for unreinforced masonry structures

EN ISO 15614-13:2023
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Upset (resistance butt) and flash welding
ISO 15614-13:2023

CEN TECHNICAL SPECIFICATIONS

CEN/TS 19102:2023
Design of tensioned membrane structures

ISO PUBLICATIONS

ISO 17607-6:2023
Steel structures. Execution of structural steelwork. Bolting
Will be implemented as an identical British Standard