newsteelconstruction.com

NSC Archives

Technical

New and revised codes & standards: From BSI Updates July & August 2018

BS EN PUBLICATIONS

BS EN ISO 683-1:2018
Heat-treatable steels, alloy steels and free-cutting steels. Non-alloy steels for quenching and tempering
Supersedes BS EN 10083-1:2006 and BS EN 10083-2:2006

BS EN ISO 683-2:2018
Heat-treatable steels, alloy steels and free-cutting steels. Alloy steels for quenching and tempering
Supersedes BS EN 10083-1:2006 and BS EN 10083-3:2006

BS EN ISO 683-3:2018
Heat-treatable steels, alloy steels and free-cutting steels. Case-hardening steels
Supersedes BS EN 10084:2008

BS EN ISO 683-4:2018
Heat-treatable steels, alloy steels and free-cutting steels. Free-cutting steels
Supersedes BS EN 10087:1999

BS EN ISO 898-3:2018
Mechanical properties of fasteners made of carbon steel and alloy steel. Flat washers with specified property classes
No current standard is superseded

BS EN ISO 6892-2:2018
Metallic materials. Tensile testing. Method of test at elevated temperature
Supersedes BS EN ISO 6892-2:2011

BS EN 14399-9:2018
High-strength structural bolting assemblies for preloading. System HR or HV. Direct tension indicators for bolt and nut assemblies
Supersedes BS EN 14399-9:2009

BS EN 15129:2018
Anti-seismic devices
Supersedes BS EN 15129:2009

BS EN IEC 60974-9:2018
Arc welding equipment. Installation and use
Supersedes BS EN 60974-9:2010

BS EN IEC 62046:2018
Safety of machinery. Application of protective equipment to detect the presence of persons
Supersedes DD CLC/TS 62046:2008

BS EN 1090-2:2018
Execution of steel structures and aluminium structures. Technical requirements for steel structures
Supersedes BS EN 1090-2:2008+A1:2011

BS EN ISO 1891-4:2018
Fasteners. Vocabulary. Control, inspection, delivery, acceptance and quality
No current standard is superseded

BS EN 10277:2018
Bright steel products. Technical delivery conditions
Supersedes BS EN 10277-1:2008, BS EN 10277-2:2008, BS EN 10277-3:2008, BS EN 10277-4:2008 and
BS EN 10277-5:2008

BS EN 12285-1:2018
Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids other than for heating and cooling of buildings
Supersedes BS EN 12285-1:2003

BS EN ISO 19011:2018
Guidelines for auditing management systems
Supersedes BS EN ISO 19011:2011

BS IMPLEMENTATIONS

BS ISO 10005:2018
Quality management. Guidelines for quality plans
Supersedes BS ISO 10005:2005

BS ISO 19203:2018
Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables. Specifications
No current standard is superseded

BS ISO 19443:2018
Quality management systems. Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)
No current standard is superseded

BS ISO 19835:2018
Non-destructive testing. Acoustic emission testing. Steel structures of overhead travelling cranes and portal bridge cranes
No current standard is superseded

BS ISO 21511:2018
Work breakdown structures for project and programme management
No current standard is superseded

CORRIGENDA TO BRITISH STANDARDS

BS EN ISO 888:2018
Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths
Corrigendum, July 2018

BS EN ISO 3581:2016
Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
Corrigendum, May 2018

BS EN 10028-7:2016
Flat products made of steels for pressure purposes. Stainless steels
Corrigendum, June 2018

BS EN 10056-1:2017
Structural steel equal and unequal leg angles. Dimensions
Corrigendum, June 2018

BS EN 10272:2016
Stainless steel bars for pressure purposes
Corrigendum, July 2018

UPDATED BRITISH STANDARDS

BS EN 15895:2011+A1:2018
Cartridge operated hand-held tools. Safety requirements. Fixing and hard marking tools
Amendment, June 2018

BS EN 1993-1-5:2006+A1:2017
Eurocode 3. Design of steel structures. Plated structural elements
Amendment, July 2018

BRITISH STANDARDS REVIEWED AND CONFIRMED

BS EN 634-2:2007
Cement-bonded particleboards. Specifications. Requirements for OPC bonded particleboards for use in dry, humid and external conditions

BS EN 13411-6:2004+A1:2008
Termination for steel wire ropes. Safety. Asymmetric wedge socket

BS EN ISO 15609-6:2013
Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Laser-arc hybrid welding

BS EN 16016-1:2011
Non destructive testing. Radiation methods. Computed tomography. Terminology

BS ISO 404:2013
Steel and steel products. General technical delivery requirements

BS EN 12811-3:2002
Temporary works equipment. Load testing

BS ISO 12655:2013
Energy performance of buildings. Presentation of measured energy use of buildings

PD ISO/TR 21932:2013
Sustainability in buildings and civil engineering works. A review of terminology

BRITISH STANDARDS WITHDRAWN

BS 6200-3.26.3:1987
(EN 24829-1:1990 ISO 4289-1:198)
Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of silicon. Steel and cast iron: spectrophotometric method for silicon contents from 0.05% (m/m) to 1.0% (m/m)
Superseded by BS EN ISO 4829-1:2018

BS EN 287-6:2010
Qualification test of welders. Fusion welding. Cast iron
Superseded by BS EN 287-6:2018

BS EN 1011-8:2004
Welding. Recommendations for welding of metallic materials. Welding of cast irons
Superseded by BS EN 1011-8:2018

BS EN ISO 4885:2017
Ferrous materials. Heat treatments. Vocabulary
Superseded by BS EN ISO 4885:2018

BS EN ISO 6507-4:2005
Metallic materials. Vickers hardness test. Tables of hardness values
Superseded by BS EN ISO 6507-4:2018

BS 6043-3.3:2000
(ISO 12985-1:2000)
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
Superseded by BS ISO 12985-1:2018

BS 6043-3.4:2000
(ISO 12985-2:2000)
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method
Superseded by BS ISO 12985-2:2018

Print Friendly, PDF & Email

Share this post

THIS MONTH'S MAGAZINE

Click on the cover to view this month's issue as a digimag.

Archives