New and Revised Codes and Standards: November & December 2004

BRITISH STANDARDS REVIEWED AND CONFIRMED

Confirmation indicates the continuing currency of a standard.

BS 4395:
Specification for high strength friction grip bolts and associated nuts and washers for structural engineering.

BS 4395-1:1969
General grade.

BS 4395-2:1969
Higher grade bolts and nuts and general grade washers.

BS 7419:1991
Specification for holding down bolts.

BS 7644:
Direct tensions indicators.

BS 7644-2:1993
Specification for nut face and bolt face washers.

BS 1449:
Steel plate, sheet and strip.

BS 1449-1
Carbon and carbon-manganese plate, sheet and strip.

BS 1449-1.1:1991
General specification

BS 1449-1.8:1991
Specification for hot rolled narrow strip based on formability.

BS 1449-1.14:1991
Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes.

BRITISH STANDARDS WITHDRAWN

If any standard in this list has been amended since publication, all amendments published to date are also withdrawn.

BS EN 10137:
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions.

BS EN 10137-3:1996
Delivery conditions for precipitation hardened steel.

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

O4/30109891 DC
BS 4449
Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification 4.

04/30109893 DC
BS 4482
Cold reduced steel wire for the reinforcement of concrete. Specification.

04/30109896 DC
BS 4483
Steel fabric for the reinforcement of concrete. Specification.

04/30123011 DC
ISO 4992-1
Steel castings. Ultrasonic examination. Part 1. Steel castings for general purposes.

04/30123014 DC
ISO 4992-2
Steel castings. Ultrasonic examination. Part 2. Steel castings for highly stressed components.

04/30117557 DC
ISO 9364
Continuous hot-dip aluminium/ zinc-coated steel sheet of commercial, drawing and structural qualities.

04/30117561 DC
ISO 4999
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities.

04/30123271 DC
ISO 10340
Steel castings for structural uses.

04/30123693 DC
EN 15048-1
Non-preloaded structural bolting assemblies. Part 1. General requirements.

04/30123712 DC
EN 15048-2
Non-preloaded structural bolting assemblies. Part 2. Suitability test.