newsteelconstruction.com

NSC Archives

Technical

New and revised codes and standards from BSI updates February 2016

BS EN PUBLICATIONS

BS EN ISO 636:2015
Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification
Supersedes BS EN ISO 636:2008

BS EN ISO 1071:2015
Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
Supersedes BS EN ISO 1071:2003

BS EN ISO 17632:2015
Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification
Supersedes BS EN ISO 17632:2008

BS IMPLEMENTATIONS

BS ISO 26843:2015
Metallic materials. Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
No current standard is superseded

UPDATED BRITISH STANDARDS

BS EN 1991-1-3:2003+A1:2015
Eurocode 1. Actions on structures. General actions. Snow loads.
AMENDMENT 1

BS EN 1993-1-4:2006+A1:2015
Eurocode 3. Design of steel structures. General rules. Supplementary rules for stainless steels
AMENDMENT 1

BS EN ISO 3266:2010+A1:2015
Forged steel eyebolts grade 4 for general lifting purposes
AMENDMENT 1

NA+A1:2015 to BS EN 1991-1-3:2003+A1:2015
UK National Annex to Eurocode 1. Actions on structures. General actions. Snow loads
AMENDMENT 1

NA+A1:2015 to BS EN 1993-1-4:2006+A1:2015
UK National Annex to Eurocode 3. Design of steel structures. General rules. Supplementary rules for stainless steels
AMENDMENT 1

BRITISH STANDARDS UNDER REVIEW

BS EN 10067:1997
Hot rolled bulb flats. Dimensions and tolerances on shape, dimensions and mass

BS EN 10131:2006
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape

BS EN 10140:2006
Cold rolled narrow steel strip. Tolerances on dimensions and shape

BS EN 10143:2006
Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape

BS EN 10162:2003
Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerance.

NEW WORK STARTED

EN 1011-8
Welding. Recommendations for welding of metallic materials. Welding of cast irons
Will supersede BS EN 1011-8:2004

EN ISO 11126-3
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag
Will supersede BS EN ISO 11126-3:1998

EN ISO 11126-4
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Coal furnace slag
Will supersede BS EN ISO 11126-4:1998

EN ISO 11126-5
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Nickel refinery slag.
Will supersede BS EN ISO 11126-5:1998

EN ISO 11126-6
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Iron furnace slag
Will supersede BS EN ISO 11126-6:1998

EN ISO 11126-7
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Specification for fused aluminium oxide
Will supersede BS EN ISO 11126-7:2001

EN ISO 17640
Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
Will supersede BS EN ISO 17640:2010

NA to BS EN 1991-2
UK National Annex to Eurocode 1. Actions on structures. Traffic loads on bridges
Will supersede NA to BS EN 1991-2:2003

NA to EN 1993-1-5
UK National Annex to Eurocode 3. Design of steel structures. Plated structural elements

ISO 6930
High yield strength flat steel products for cold forming

ISO PUBLICATIONS

ISO 6935-2:2015
(Edition 3)
Steel for the reinforcement of concrete. Ribbed bars
Will not be implemented as a British Standard

ISO/TS 19397:2015
Determination of the film thickness of coatings using an ultrasonic gage
Will not be implemented as an identical British Standard

Print Friendly, PDF & Email

Share this post

Related Posts

THIS MONTH’S MAGAZINE

Untitled Page

Click on the cover to view this month's issue as a digimag.

Archives