newsteelconstruction.com

NSC Archives

News

Forum on CE Marking held in London

Posted on by in News

In order to discuss CE Marking requirements for fabricated steelwork the BCSA hosted a European Convention for Constructional Steelwork (ECCS) workshop in London on 29 September.

The workshop, which was attended by 30 people from ten European countries, also discussed the views from other member states on both the interpretation of the recommendations in EN 1090-1 (CE Marking standard) and the implementation of CE Marking.

At the workshop presentations were given by Dr David Moore, BCSA Director of Engineering, on the Construction Products Directive and the regulatory background; Dr Roger Pope, BCSA Consultant, on the basis of CE Marking in EN 1090-1 and EN 1090-1; and Jeff Garner, BCSA Welding and Fabrication Manager, on welding quality management requirements.

For further information on CE Marking of structural steelwork refer to the BCSA publication No.46/08 ‘Guide to the CE Marking of Structural Steelwork’.

Print Friendly, PDF & Email

Share this post

Related Posts

THIS MONTH’S MAGAZINE

Untitled Page

Click on the cover to view this month's issue as a digimag.

Archives