New and revised codes & standards; from BSI Updates February 2020

BRITISH STANDARDS

BS 7910:2019
Guide to methods for assessing the acceptability of flaws in metallic structures
Supersedes BS 7910:2013+A1:2015

BS EN ISO 6892-1:2019
Metallic materials. Tensile testing. Method of test at room temperature
Supersedes BS EN ISO 6892-1:2016

BS EN ISO 8504-1:2019
Preparation of steel substrates before application of paints and related products. Surface preparation methods. General principles
Supersedes BS EN ISO 8504-1:2001

BS EN ISO 15614-7:2019
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Overlay welding
Supersedes BS EN ISO 15614-7:2016

BRITISH STANDARDS CONFIRMED

BS ISO 14347:2008
Fatigue. Design procedure for welded hollow-section joints. Recommendations

BRITISH STANDARDS WITHDRAWN

BS 7910:2013+A1:2015
Guide to methods for assessing the acceptability of flaws in metallic structures
Superseded by BS 7910:2019

BS EN ISO 6892-1:2016
Metallic materials. Tensile testing. Method of test at room temperature
Superseded by BS EN ISO 6892-1:2019

BS EN ISO 8504-1:2001
(BS 7079-D1:2000)
Preparation of steel substrates before application of paints and related products. Surface preparation methods. General principles
Also numbered BS 7079-D1:2000. Superseded by BS EN ISO 8504-1:2019

BS EN ISO 15614-7:2016
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Overlay welding
Superseded by BS EN ISO 15614-7:2019

BRITISH STANDARDS UNDER REVIEW

BS EN ISO 1461:2009
Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods

BS EN 1559-2:2014
Founding. Technical conditions of delivery. Additional requirements for steel castings

BS EN ISO 9018:2015
Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints

BS EN 10088-1:2014
Stainless steels. List of stainless steels

BS EN 10088-2:2014
Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

BS EN 10088-3:2014
Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

BS EN ISO 23277:2015
Non-destructive testing of welds. Penetrant testing. Acceptance levels

BS EN ISO 23278:2015
Non-destructive testing of welds. Magnetic particle testing. Acceptance levels

BS 131-4:1972
Notched bar tests. Calibration of pendulum impact testing machines for metals.

BS 131-6:1998
Notched bar tests. Method for precision determination of Charpy V-notch impact energies for metals

BS 131-7:1998
Notched bar tests. Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies for metals

BS 2573-1:1983
Rules for the design of cranes. Specification for classification, stress calculations and design criteria for structures

BS 2573-2:1980
Rules for the design of cranes. Specification for classification, stress calculations and design of mechanisms

BS 4570:1985
Specification for fusion welding of steel castings

BS 4933:2010
Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts

BS 5493:1977
Code of practice for protective coating of iron and steel structures against corrosion

BS 5744:1979
Code of practice for safe use of cranes (overhead/underhung travelling and goliath cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes, container handling cranes and rail-mounted low carriage cranes)

BS 7121-2-7:2012+A1:2015
Code of practice for the safe use of cranes. Inspection, maintenance and thorough examination. Overhead travelling cranes, including portal and semi-portal cranes, hoists, and their supporting structures

BS 7608:2014+A1:2015
Guide to fatigue design and assessment of steel products

BS ISO 9018:2015
Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints

NEW WORK STARTED

EN 1993-1-4:2006/A2
Eurocode 3. Design of steel structures. General rules. Supplementary rules for stainless steels
Will supersede None

CEN EUROPEAN STANDARDS

EN ISO 15614-7:2019
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Overlay welding
(ISO 15614-7:2016)

ISO PUBLICATIONS

ISO 11971:2020
Steel and iron castings. Visual testing of surface quality
Will be implemented as an identical British Standard