newsteelconstruction.com

NSC Archives

Technical

New and revised codes and standards, from BSI updates, November & December 2024

From BSI Updates November 2024

UPDATED BRITISH STANDARDS

BS EN ISO 9013:2017+A1:2024
Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances.
amendment, October 2024

BS EN ISO 19443:2022+A1:2024
Quality management systems. Specific requirements for the application of ISO 9001:2015 by organisations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS).
amendment, September 2024; Corrigendum, August 2022

BS EN PUBLICATIONS

BS EN 1998-1-1:2024
Eurocode 8. Design of structures for earthquake resistance. General rules and seismic action.
supersedes BS EN 1998-1:2004+A1:2013

BS EN 1998-5:2024
Eurocode 8. Design of structures for earthquake resistance. Geotechnical aspects, foundations, retaining and underground structures.
supersedes BS EN 1998-5:2004

BS EN 10088-2:2024
Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resistant steels for general purposes.
supersedes BS EN 10088-2:2014

BS EN ISO 544:2024
Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings.
supersedes BS EN ISO 544:2017

BS EN ISO 636:2024
Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification.
supersedes BS EN ISO 636:2017

BS EN ISO 14344:2024
Welding consumables. Procurement of filler materials and fluxes.
supersedes BS EN ISO 14344:2010

BS EN ISO 18563-2:2024
Non-destructive testing. Characterisation and verification of ultrasonic phased array equipment. Array probes.
supersedes BS EN ISO 18563-2:2017

NEW WORK STARTED

CEN/TS WI 00250294
Eurocode 8. Design of structures for earthquake resistance. Characterisation and qualification of structural components for seismic applications by means of cyclic tests.

EN ISO 18275
Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. Classification.

IEC/TR 30138
Digital Twin. Fidelity metric of digital twin system.

ISO 14077
Environmental management. Life cycle assessment. Requirements and guidelines for application of Chain of Custody (CoC) approaches in Life Cycle Assessment (LCA).

ISO PUBLICATIONS

ISO 636:2024
Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification.

ISO 14344:2024
Welding consumables. Procurement of filler materials and fluxes.

ISO 18893:2024
Mobile elevating work platforms. Safety principles, inspection, maintenance and operation.

ISO 23779:2024
Shot blasting machinery. Safety and environmental requirements.

BRITISH STANDARDS REVIEWED AND CONFIRMED

BS EN ISO 19650-3:2020
Organisation and digitisation of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling. Operational phase of the assets.

BS EN ISO 945-1:2019
Microstructure of cast irons. Graphite classification by visual analysis.

BS EN ISO 6506-4:2014
Metallic materials. Brinell hardness test. Table of hardness values.

BS ISO 945-4:2019
Microstructure of cast irons. Test method for evaluating nodularity in spheroidal graphite cast irons.

BS EN 358:2018
Personal protective equipment for work positioning and prevention of falls from a height. Belts and lanyards for work positioning or restraint.

BS EN 363:2018
Personal fall protection equipment. Personal fall protection systems.

BS EN 1497:2007
Personal fall protection equipment. Rescue harnesses.

PD ISO/TS 16733-2:2021
Fire safety engineering. Selection of design fire scenarios and design fires. Design fires.

BRITISH STANDARDS WITHDRAWN

PD 6698:2009
Recommendations for the design of structures for earthquake resistance to BS EN 1998.

BS EN 10088-2:2014
Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes.
superseded by BS EN 10088-2:2024

BS EN ISO 544:2017
Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings.
superseded by BS EN ISO 544:2024

BS EN ISO 636:2017
Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification.
superseded by BS EN ISO 636:2024

BS EN ISO 14344:2010
Welding consumables. Procurement of filler materials and fluxes.
superseded by BS EN ISO 14344:2024

BS EN 353-2:2002
Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line.
superseded by BS EN 353-2:2024

BS IMPLEMENTATIONS

BS ISO 16368:2024
Mobile elevating work platforms. Design, calculations, safety requirements and test methods.

BS ISO 18893:2024
Mobile elevating work platforms. Safety principles, inspection, maintenance and operation.

BS ISO 59014:2024
Environmental management and circular economy. Sustainability and traceability of the recovery of secondary materials. Principles, requirements and guidance.

CEN EUROPEAN STANDARDS

EN 1998-1-1:2024
Eurocode 8. Design of structures for earthquake resistance. General rules and seismic action.

EN 1998-5:2024
Eurocode 8. Design of structures for earthquake resistance. Geotechnical aspects, foundations, retaining and underground structures.

EN 10088-2:2024
Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resistant steels for general purposes.

EN ISO 544:2024
Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings.

EN ISO 636:2024
Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification.

EN ISO 9013:2017/A1:202
Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances.
amendment, September 2024

EN ISO 14344:2024
Welding consumables. Procurement of filler materials and fluxes.

EN ISO 45001:2023/A1:2024
Occupational health and safety management systems. Requirements with guidance for use.
amendment, September 2024


From BSI Updates December 2024

BRITISH STANDARDS REVIEWED AND CONFIRMED

PD 6695-1-10:2009
Recommendations for the design of structures to BS EN 1993-1-10.

BS 7121-2-1:2012
Code of practice for the safe use of cranes. Inspection, maintenance and thorough examination. General.

BS 7121-2-4:2013
Code of practice for the safe use of cranes. Inspection, maintenance and thorough examination. Loader cranes.

BS 7121-13:2009
Code of practice for safe use of cranes. Hydraulic gantry lifting systems.

BS EN 1011-3:2018
Welding. Recommendations for welding of metallic materials. Arc welding of stainless steels.

BS EN 1011-6:2018
Welding. Recommendation for welding of metallic materials. Laser beam welding.

BS EN ISO 6947:2019
Welding and allied processes. Welding positions.

BS EN ISO 14174:2019
Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification.

BS EN ISO 17641-1:2004
Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. General.

BS EN ISO 17642-1:2004
Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. General.

BS EN ISO 17642-2:2005
Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. Self-restraint tests.

BS EN ISO 17642-3:2005
Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. Externally loaded tests.

BS EN ISO 24598:2019
Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels. Classification.

BS EN PUBLICATIONS

BS EN ISO 16810:2024
Non-destructive testing. Ultrasonic testing. General principles.
supersedes BS EN ISO 16810:2014

CEN EUROPEAN STANDARDS

EN 17632-2:2024
Building information modelling (BIM). Semantic modelling and linking (SML). Domain-specific modelling patterns.

CEN TECHNICAL SPECIFICATION

CEN/TS 1090-201:2024
Execution of steel structures and aluminium structures. Reuse of structural steel.

ISO PUBLICATIONS

ISO 16810:2024
Non-destructive testing. Ultrasonic testing. General principles.ISO 16733-1:2024
Fire safety engineering. Selection of design fire scenarios and design fires. Selection of design fire scenarios.

NEW WORK STARTED

EN ISO 19650-1
Organisation and digitisation of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling. Concepts and principles.

EN ISO 19650-2
Organisation and digitisation of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling. Information management process.

ISO 6707-2
Buildings and civil engineering works. Vocabulary. Contract and communication terms.

EN ISO 2553
Welding and allied processes. Symbolic representation on drawings. Welded joints.

EN ISO 11666
Non-destructive testing of welds. Ultrasonic testing. Acceptance levels.

EN ISO 13588
Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology.

EN ISO 17640
Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment.

EN ISO 19285
Non-destructive testing of welds. Phased array ultrasonic testing (PAUT). Acceptance levels.

ISO 17846
Welding and allied processes. Health and safety. Wordless precautionary labels for equipment and consumables used in arc welding and cutting.

PUBLISHED DOCUMENTS

PD CEN/TS 1090-201:2024
Execution of steel structures and aluminium structures. Reuse of structural steel.

BRITISH STANDARDS WITHDRAWN

BS EN ISO 16810:2014
Non-destructive testing. Ultrasonic testing. General principles.
superseded by BS EN ISO 16810:2024

BS ISO 16733-1:2015
Fire safety engineering. Selection of design fire scenarios and design fires. Selection of design fire scenarios.
superseded by BS ISO 16733-1:2024

DOCUMENTS NOT ISSUED AS DPCs

IEC 60974-1
Arc welding equipment. Welding power sources.

BS IMPLEMENTATIONS

BS ISO 16733-1:2024
Fire safety engineering. Selection of design fire scenarios and design fires. Selection of design fire scenarios.
supersedes BS ISO 16733-1:2015

CEN REPORTS

CEN ISO/TR 15235:2024
Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contamination.

CORRIGENDA TO BRITISH STANDARDS

PD CEN ISO/TR 15235:2024
Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contamination.

SPECIAL ANNOUNCEMENTS

24/30474244 DC
BS ISO 11124-6 Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives

Share this post

Related Posts

THIS MONTH'S MAGAZINE

Click on the cover to view this month's issue as a digimag.

Archives