New and revised codes and standards: from BSI Updates March 2025

BS EN PUBLICATIONS

BS EN ISO 19650-6:2025
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling. Health and safety information.
supersedes PAS 1192-6:2018

BS EN ISO 3506-3:2025
Fasteners. Mechanical properties of corrosion resistant stainless steel fasteners. Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes.
supersedes BS EN ISO 3506-3:2009

BS EN ISO 3506-4:2025
Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners. Tapping screws with specified grades and hardness classes.
supersedes BS EN ISO 3506-4:2009

BS EN ISO 14343:2025
Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification.supersedes BS EN ISO 14343:2017

BS EN ISO 23779:2025
Shot blasting machinery. Safety and environmental requirements.
supersedes BS EN 1248:2001+A1:2009

NEW WORK STARTED

EN ISO 19650-3
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling. Implementation of the information management process.

EN ISO 14731
Welding coordination. Tasks and responsibilities.

BRITISH STANDARDS WITHDRAWN

BS EN ISO 3506-3:2009
Mechanical properties of corrosion-resistant stainless steel fasteners. Set screws and similar fasteners not under tensile stress.

BS EN ISO 3506-4:2009
Mechanical properties of corrosion-resistant stainless steel fasteners. Tapping screws.

BS EN ISO 14343:2017
Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification.

BS ISO 965-4:2021
ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing.

BS ISO 965-5:1998+A1:2021
ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing.

BS ISO 18878:2013
Mobile elevating work platforms. Operator (driver) training.

PAS 1192-6:2018
Specification for collaborative sharing and use of structured Health and Safety information using BIM.

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT

25/30505842 DC
BS EN 18162 Building Information Modelling (BIM). Digital twins applied to the built environment. Concept and definitions.

25/30509816 DC
BS EN ISO 14001:2015/A2 Environmental management systems. Requirements with guidance for use.

ISO PUBLICATIONS

ISO 4301-5:2025
Cranes. Classification. Bridge and gantry cranes.

ISO 16834:2025
Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels. Classification.

ISO 21952:2025
Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels. Classification.

BS IMPLEMENTATIONS

BS ISO 965-4:2025
ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external threads to mate with internal threads made to tolerance position H or G after galvanizing.
supersedes BS ISO 965-4:2021

BS ISO 965-5:2025
ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal threads to mate with hot-dip galvanized external threads with maximum size of tolerance position h before galvanizing.
supersedes BS ISO 965-5:1998+A1:2021

BS ISO 4301-5:2025
Cranes. Classification. Bridge and gantry cranes.

BS ISO 18878:2025
Mobile elevating work platforms. Operator training.
supersedes BS ISO 18878:2013

CEN EUROPEAN STANDARDS

EN ISO 19650-6:2025
Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM). Information management using building information modelling. Health and safety information.

EN ISO 3506-3:2025
Fasteners. Mechanical properties of corrosion resistant stainless steel fasteners. Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes (ISO 3506-3:2025).

EN ISO 3506-4:2025
Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners. Tapping screws with specified grades and hardness classes (ISO 3506-4:2025).

EN ISO 14343:2025
Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification.

PUBLISHED DOCUMENTS

PD CEN/TS 1993-1-101:2022
Eurocode 3: Design of steel structures. Alternative interaction method for members in bending and compression.