{"id":14912,"date":"2005-02-01T17:10:23","date_gmt":"2005-02-01T17:10:23","guid":{"rendered":"http:\/\/www.newsteelconstruction.com\/wp\/?p=14912"},"modified":"2013-01-07T17:19:46","modified_gmt":"2013-01-07T17:19:46","slug":"new-and-revised-codes-and-standards-november-december-2004","status":"publish","type":"post","link":"https:\/\/www.newsteelconstruction.com\/wp\/new-and-revised-codes-and-standards-november-december-2004\/","title":{"rendered":"New and Revised Codes and Standards: November & December 2004"},"content":{"rendered":"

BRITISH STANDARDS REVIEWED AND CONFIRMED<\/strong><\/p>\n

Confirmation indicates the continuing currency of a standard.<\/p>\n

BS 4395:
\n<\/strong>Specification for high strength friction grip bolts and associated nuts and washers for structural engineering.<\/p>\n

BS 4395-1:1969
\n<\/strong>General grade.<\/p>\n

BS 4395-2:1969
\n<\/strong>Higher grade bolts and nuts and general grade washers.<\/p>\n

BS 7419:1991
\n<\/strong>Specification for holding down bolts.<\/p>\n

BS 7644:
\n<\/strong>Direct tensions indicators.<\/p>\n

BS 7644-2:1993
\n<\/strong>Specification for nut face and bolt face washers.<\/p>\n

BS 1449:
\n<\/strong>Steel plate, sheet and strip.<\/p>\n

BS 1449-1
\n<\/strong>Carbon and carbon-manganese plate, sheet and strip.<\/p>\n

<\/strong>BS 1449-1.1:1991
\n<\/strong>General specification<\/p>\n

<\/strong>BS 1449-1.8:1991
\n<\/strong>Specification for hot rolled narrow strip based on formability.<\/p>\n

<\/strong>BS 1449-1.14:1991
\n<\/strong>Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes.<\/p>\n

<\/div>\n

BRITISH STANDARDS WITHDRAWN<\/strong><\/p>\n

If any standard in this list has been amended since publication, all amendments published to date are also withdrawn.<\/p>\n

BS EN 10137:
\n<\/strong>Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions.<\/p>\n

BS EN 10137-3:1996
\n<\/strong>Delivery conditions for precipitation hardened steel.<\/p>\n

<\/div>\n

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT<\/strong><\/p>\n

O4\/30109891 DC
\n<\/strong>BS 4449
\n<\/strong>Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification 4.<\/p>\n

04\/30109893 DC
\n<\/strong>BS 4482
\n<\/strong>Cold reduced steel wire for the reinforcement of concrete. Specification.<\/p>\n

04\/30109896 DC
\n<\/strong>BS 4483
\n<\/strong>Steel fabric for the reinforcement of concrete. Specification.<\/p>\n

04\/30123011 DC
\n<\/strong>ISO 4992-1
\n<\/strong>Steel castings. Ultrasonic examination. Part 1. Steel castings for general purposes.<\/p>\n

04\/30123014 DC
\n<\/strong>ISO 4992-2
\n<\/strong>Steel castings. Ultrasonic examination. Part 2. Steel castings for highly stressed components.<\/p>\n

04\/30117557 DC
\n<\/strong>ISO 9364
\n<\/strong>Continuous hot-dip aluminium\/ zinc-coated steel sheet of commercial, drawing and structural qualities.<\/p>\n

04\/30117561 DC
\n<\/strong>ISO 4999
\n<\/strong>Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities.<\/p>\n

04\/30123271 DC
\n<\/strong>ISO 10340
\n<\/strong>Steel castings for structural uses.<\/p>\n

04\/30123693 DC
\n<\/strong>EN 15048-1
\n<\/strong>Non-preloaded structural bolting assemblies. Part 1. General requirements.<\/p>\n

04\/30123712 DC
\n<\/strong>EN 15048-2
\n<\/strong>Non-preloaded structural bolting assemblies. Part 2. Suitability test.<\/p>\n","protected":false},"excerpt":{"rendered":"

BRITISH STANDARDS REVIEWED AND CONFIRMED Confirmation indicates the continuing currency of a standard. BS 4395: Specification for high strength friction grip bolts and associated nuts and washers for structural engineering. BS 4395-1:1969 General grade. BS 4395-2:1969 Higher grade bolts and nuts and general grade washers. BS 7419:1991 Specification for holding down bolts. BS 7644: Direct […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[78,5],"tags":[115],"class_list":["post-14912","post","type-post","status-publish","format-standard","hentry","category-codes-and-standards","category-tech","tag-codes-and-standards-2"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p3WsLP-3Sw","_links":{"self":[{"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/posts\/14912","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/comments?post=14912"}],"version-history":[{"count":4,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/posts\/14912\/revisions"}],"predecessor-version":[{"id":14915,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/posts\/14912\/revisions\/14915"}],"wp:attachment":[{"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/media?parent=14912"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/categories?post=14912"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/tags?post=14912"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}