{"id":1114,"date":"2010-10-01T14:40:33","date_gmt":"2010-10-01T14:40:33","guid":{"rendered":"http:\/\/www.newsteelconstruction.com\/wp\/?p=1114"},"modified":"2013-02-11T11:14:57","modified_gmt":"2013-02-11T11:14:57","slug":"bridges-provide-road-and-rail-solutions","status":"publish","type":"post","link":"https:\/\/www.newsteelconstruction.com\/wp\/bridges-provide-road-and-rail-solutions\/","title":{"rendered":"Bridges provide road and rail solutions"},"content":{"rendered":"
\"\"<\/a>

Using steel allowed all work to be undertaken from the riverbanks<\/p><\/div>\n

When it comes to building bridges two transportation projects in the\u00a0Republic of Ireland have highlighted steel\u2019s flexibility and ease of construction.<\/p>\n

<\/span>FACT FILE: Structure S19, M3 Motorway, County Meath, Ireland<\/h5>

Main client:<\/strong>\u00a0National Roads Authority
\nMain contractor:<\/strong>\u00a0M3 Motorway JV
\nStructural engineer:<\/strong> Roughan O\u2019Donovan
\nSteelwork contractor:<\/strong> SIAC Butlers Steel
\nSteel tonnage:<\/strong> 650t<\/p><\/div>\n

Ireland\u2019s recently opened M3 motorway provides a much needed improvement to one of the country\u2019s busiest commuter routes. By connecting the towns of Kells, Navan and Dunshaughlin to the M50 Dublin ring road, the 66km-long highway has alleviated town centre congestion, while simultaneously making the life of driving commuters less stressful.<\/p>\n

Just north of Dunshauglin the M3 crosses the River Boyne, the widest obstacle along the highway\u2019s route and one which required the largest structure.<\/p>\n

A steel composite solution was chosen for the bridge (known as S19) as this was deemed the best way of avoiding any work being undertaken in the river.<\/p>\n

The bridge consists of three arched spans supported on concrete piers; two outer 37m spans and a central span of 56m. The middle section spans the River Boyne, while the outer two allow local – predominantly farm vehicles – access along the riverbank.<\/p>\n

Steelwork contractor SIAC Butlers Steel fabricated and brought the bridge\u2019s girders to site in fully braced pairs. \u201cThis minimised the amount of on-site work needed,\u201d explains Tony Callanan, SIAC Butlers\u2019 Construction Director. \u201cAnd also meant we could lift fully assembled girders into place across the river from the bank.\u201d<\/p>\n

Initially the 56m-long central span was erected with the aid of a 1,000t capacity crane positioned on the riverbank. These girders were too long to be transported by road as complete sections so they were delivered in two parts and then spliced together on site before being lifted into place. Because of their extra length, the central span\u2019s girders are 3.8m deep, while the outer spans are 2.2m deep.<\/p>\n

\u201cOnce the mid section was in place, the outer spans were then lifted using a 400t capacity mobile crane,\u201d adds Mr Callanan. \u201cAs these spans were smaller, we were able to fabricate and deliver the girders to site in complete 37m lengths.\u201d<\/p>\n

\"\"<\/a>

The 56m long central span consists of twelve girders brought to site in six pairs<\/p><\/div>\n

Aesthetics have played a key role in the design of this structure, with landscaped areas placed around the supporting piers and the client specifying a brilliant blue polyurethane paint for the steelwork, which was applied in SIAC Butlers\u2019 fabrication facility.<\/p>\n

\u201cMost of the connections on the bridge are bolted, but for aesthetic reasons the outermost girders were site butt welded,\u201d adds Mr Callanan.<\/p>\n

As well as completing Structure S19, SIAC Butlers also fabricated, delivered and erected the 46 sign gantries along the M3 and toll booths at either end of the motorway.<\/p>\n

Summing up the work, Pat Egan, SIAC Butlers\u2019 Deputy Managing Director, says: \u201cBridge projects will continue to be a key area of growth for the company in the future. As a fully certified member of the BCSA RQSC Bridgeworks Scheme we\u2019ve built up a proven capability in the fabrication and installation of road and rail bridges.\u201d<\/p>\n

<\/div><\/div>\n

New commuter railway<\/strong><\/h3>\n
\n
\"\"<\/a>

The canal bridge was designed to look like the other older bridges along the route<\/p><\/div>\n<\/div>\n

<\/span>FACT FILE: Dublin - Navan railway line<\/h5>
Main client:<\/strong> Irish Rail
\nMain contractor:<\/strong>\u00a0SIAC Construction
\nStructural engineer:<\/strong> Capita Symonds
\nSteelwork contractor:<\/strong> SIAC Butlers Steel
\nSteel tonnage:<\/strong>250t<\/div><\/p>\n

Currently under construction, the Dublin to Navan railway project was also proposed to address growing traffic problems in County Meath. Similar to the M3 motorway, the new railway will provide an alternative transportation route in and out of Dublin.
\nThe overall project consists of two phases; Phase one includes the construction of a 7.5km double track railway line between Clonsilla near Dublin and the M3 Interchange at Pace, just north of Dunboyne in County Meath. This part of the project is scheduled for completion this year, while a second phase extending the line a further 34km north towards Navan is due to be ready by 2015.<\/p>\n

Near Dunboyne the railway crosses the Royal Canal and this obstacle required SIAC Butlers Steel to erect a single span box girder bridge, requiring 120t of steel. The largest steel structure along the railway line, the company fabricated and delivered the six arched girders – 31m long – to the site and then assembled\u00a0 them into braced pairs using 36mm diameter stainless steel bolts. The three assembled pairs were then erected in one full day lifting operation, using a 350t capacity mobile crane.<\/p>\n

\u201cThis is a compression arch bridge,\u201d explains Mr Callanan. \u201cThe steelwork is quite heavy-duty for a small bridge, but it has to be to carry a railway.\u201d<\/p>\n

Each of the girders is fabricated from 400 \u00d7 400 \u00d7 25 plated box sections, while the end pin connections are 110mm diameter.<\/p>\n

\u201cWe also chose this design so it would mimic the other bridges along the canal,\u201d explains Aidan McAdam, Project Manager for Irish Rail. \u201cTo get the required design and do it cost effectively we had to go with the steel option.\u201d<\/p>\n

SIAC Butlers has also been contracted to provide steel structures for three new stations along the Phase one route. Station buildings including a ticket office have been erected at Dunboyne and Pace, while a slightly smaller station building was erected at Hansfield.<\/p>\n

\"\"<\/a>

Footbridge decks were brought to site fully assembled<\/p><\/div>\n

The station buildings are small portal frame structures, quick to erect and chosen for their cost effectiveness and sustainability credentials.<\/p>\n

\u201cSteel\u2019s flexibility, which gives us the possible option of extending or enlarging the station buildings was one of the main reasons for using steel frames,\u201d says McAdam.<\/p>\n

SIAC Butlers has also installed steel footbridges at Dunboyne and Pace stations. Each weighing 25t and measuring 18m long, both decks for these structures were brought to site fully assembled and lifted into position in one operation.<\/p>\n

\u201cThis is one of the benefits of steel bridges,\u201d explains Mr Callanan. \u201cWe needed to do minimal site work as the whole footbridge was fabricated and assembled in our facility, and then brought to site in one piece. This also meant we didn\u2019t interfere with other on-site trades.\u201d<\/p>\n

\u00a0
<\/div><\/div>\n<\/div>\n
<\/div>\n
\"\"<\/a>A\u00a0new road bridge has been installed across the River Brick, Ballingar, County Kerry by SIAC Butlers Steel working on behalf of main contractor BAM Construction. The 36m-long single span warren truss structure was transported to site by road, from SIAC\u2019s Portarlington fabrication facility, in full length sections. Weighing 90t in total, the entire bridge was erected in a single day using one 450t capacity mobile crane.<\/p>\n
<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

When it comes to building bridges two transportation projects in the\u00a0Republic of Ireland have highlighted steel\u2019s flexibility and ease of construction. Ireland\u2019s recently opened M3 motorway provides a much needed improvement to one of the country\u2019s busiest commuter routes. By connecting the towns of Kells, Navan and Dunshaughlin to the M50 Dublin ring road, the […]<\/p>\n","protected":false},"author":2,"featured_media":1118,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[4],"tags":[24,238,240,45,239],"class_list":["post-1114","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-feature","tag-bridge","tag-ireland","tag-rail-bridge","tag-siac","tag-siac-butlers-steel"],"jetpack_featured_media_url":"https:\/\/www.newsteelconstruction.com\/wp\/wp-content\/uploads\/2012\/04\/aDSC_4177.jpg","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p3WsLP-hY","_links":{"self":[{"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/posts\/1114","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/comments?post=1114"}],"version-history":[{"count":10,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/posts\/1114\/revisions"}],"predecessor-version":[{"id":15433,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/posts\/1114\/revisions\/15433"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/media\/1118"}],"wp:attachment":[{"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/media?parent=1114"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/categories?post=1114"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.newsteelconstruction.com\/wp\/wp-json\/wp\/v2\/tags?post=1114"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}