newsteelconstruction.com

NSC Archives

Technical

New and revised codes & standards: from BSI Updates February 2017

BS EN PUBLICATIONS

BS EN ISO 148-1:2016
Metallic materials. Charpy pendulum impact test. Test method
Supersedes BS EN ISO 148-1:2010

BS EN ISO 148-3:2016
Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
Supersedes BS EN ISO 148-3:2008

BS EN ISO 9934-1:2016
Non-destructive testing. Magnetic particle testing. General principles
Supersedes BS EN ISO 9934-1:2015

BS EN ISO 10675-1:2016
Non-destructive testing of welds. Acceptance levels for radiographic testing. Steel, nickel, titanium and their alloys
Supersedes BS EN ISO 10675-1:2013

BS EN ISO 17635:2016
Non-destructive testing of welds. General rules for metallic materials.
Supersedes BS EN ISO 17635:2010

BS EN ISO 17637:2016
Non-destructive testing of welds. Visual testing of fusion-welded joints
Supersedes BS EN ISO 17637:2011

BS EN ISO 19598:2016
Metallic coatings. Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
No current standard is superseded

NEW WORK STARTED

BS 5427:2016/A1
Code of practice for the use of profiled sheet for roof and wall cladding on buildings

ISO 4986
Steel castings. Magnetic particle inspection
Will supersede BS ISO 4986:2010

ISO 4987
Steel castings. Liquid penetrant inspection
Will supersede BS ISO 4987:2010

ISO 4992-1
Steel castings. Ultrasonic examination. Steel castings for general purposes
Will supersede BS ISO 4992-1:2006

ISO 4992-2
Steel castings. Ultrasonic examination. Steel castings for highly stressed components
Will supersede BS ISO 4992-2:2006

ISO 16573
Steel. Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels
Will supersede BS ISO 16573:2015

ISO PUBLICATIONS

ISO 8502-2:2017
(Edition 3)
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces
Will be implemented as an identical British Standard

ISO 8502-3:2017
(Edition 2)
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Will be implemented as an identical British Standard

Print Friendly, PDF & Email

Share this post

THIS MONTH'S MAGAZINE

Click on the cover to view this month's issue as a digimag.

Archives